Exit and Emergency Lighting Inspection Software
InspectWarden is mobile inspection and recordkeeping software for small fire-protection and life-safety contractors.
Egress lighting is the highest-count, lowest-glamour work on the route: dozens of fixtures per building, a monthly and an annual expectation, and a record that usually amounts to a tick on a photocopied sheet.
The inspection is not the problem. The record is.
One building, several systems, several different pieces of paper.
Fixture counts drift as buildings get remodeled. Without a per-fixture record, a technician is counting again on every visit and no two visits agree.
A failed battery gets noted on the sheet and often never becomes a quote, so replacement work you already identified never turns into revenue.
Running a separate tool for exit and emergency lighting and another for everything else just moves the problem. The record has to be one record.
What InspectWarden does today
This is the current product for exit and emergency lighting work, and for the other 15 inspection types on the same route — not a roadmap and not a demo script.
Per-fixture records instead of a building tick sheet. Each unit or combination fixture is an asset with its own location, history and findings, so the count stops being rebuilt from scratch and a repeat failure is visible.
Failures that become replacement quotes. Log the finding with severity, notes, photos and a timestamp, then build the replacement estimate from your own price book and track it to a work order.
16 inspection types on one record. Extinguishers, wet-pipe sprinkler, fire alarm, kitchen suppression, exit and emergency lighting, AED, smoke and CO detectors, exit doors, hood and duct, standpipe, fire pump, backflow preventer, fire doors, fire dampers and emergency generators — each with its own checklist and cadence, all under the same customer and property.
Recurring schedules and reinspections. Monthly, quarterly, semi-annual and annual cadences are set per system type, so closing an inspection builds the next visit’s schedule as the route runs, and reinspections have their own view.
Deficiencies that turn into estimates and work orders. Record the finding with severity, notes, photos and a timestamp, then build a quote from your own price book and track it to a work order, so repair work in your own reports stops evaporating.
Reports, share links and a customer portal. Generate the report, share it by link with a verification page, and give building owners a portal showing their inspections and open findings without another call to your office.
What it does not do yet
Being straight about this is cheaper than a disappointed trial.
- Full offline mode — drafts sync, but a mechanical room with no signal at all is still a problem.
- Printable bulk tag sheets — assets import in bulk; printing a stack of physical tags does not.
- Accounting push — estimates live here; there is no QuickBooks or invoicing sync yet.
- Self-service checklist builder — new system types are added for you rather than by you.
- Dispatch, routing and job costing — this is the inspection record, not the whole back office.
Everything above is genuinely not built. Everything in the capabilities section is live today.
Who this is for
A good fit if you are:
- An independent fire-protection or life-safety contractor, roughly 2–30 employees
- Inspecting exit and emergency lighting alongside other systems on the same route
- Still on paper tags, carbon-copy tickets, or a spreadsheet only one person understands
- Losing time reconstructing history when a customer, insurer or AHJ asks
Not a fit yet if you are:
- An enterprise with an existing integrated field-service platform
- Needing full offline inspections in buildings with no signal at all
- Looking for accounting, dispatch or full job costing rather than the inspection record
Built for the crew doing the route
Field software fails for boring reasons. It takes too many taps. It assumes a manager who does not carry a ladder. It makes a technician learn a different screen for every kind of device.
InspectWarden keeps the same shape for every system type — open the asset, work the checklist, close with an outcome — so a technician who can inspect the fixture in it can inspect an extinguisher, a hood or an exit door in it.
A note on codes and jurisdictions
Inspection requirements vary by jurisdiction and by authority having jurisdiction (AHJ). InspectWarden helps contractors record and organize inspection work; it does not replace the contractor's professional judgment or local code requirements.
We will not tell you the software makes you compliant. It makes your work findable, attributable and provable — which is usually what the person asking actually wants.
See it on your own route
If your crew inspects exit and emergency lighting plus other systems and the history lives in three binders and two phones, a walkthrough is the fastest way to judge whether this fits.
- Does InspectWarden cover exit and emergency lighting?
- Yes. Exit and emergency lighting is a live inspection module with its own guided checklist, cadence options and per-fixture asset records.
- Can I track monthly and annual checks on the same fixtures?
- Yes. Cadences are set per system type and next-due dates are calculated when an inspection closes, so both the monthly and the longer-interval work stay visible.
- How are large fixture counts loaded in?
- Assets can be imported from CSV with a mapping step, a dry-run preview, and a history of what was committed, so a large building does not have to be typed in by hand.
- Who is InspectWarden built for?
- Small fire-protection and life-safety contractors, roughly 2–30 employees, running multi-system inspection routes. It is not built for enterprise back offices.
- Does InspectWarden make my inspections code compliant?
- No, and be cautious of any software that claims it does. Requirements vary by jurisdiction and by AHJ. InspectWarden records and organizes your inspection work; it does not replace professional judgment or local code requirements.
- What does it cost?
- Solo is $39/month, Crew is $89/month and Multi-company is $199/month, each with an annual option that saves roughly two months. Every plan starts with a 14-day free trial.
- Can I import the assets I already have on paper?
- Yes. CSV import includes a column mapping step, a dry-run preview and a history of what was committed, and inspection data can be exported back out at any time.